Configuration; Sensor" Menu, Teaching-In/Deleting Sensors; Time/Date" Menu, Setting The Time And Date; Units" Menu, Setting The Display Units - HomeMatic WDC7000 Operating Manual

4.3

Configuration

The weather station is supplied in a condition where its basic functions are ready for
operation immediately after start-up, with no need for any other settings to be made
(basic functions do not include the moon phase indicator, display of sunrise and sunset
times, date, time or min./max. indicator).
Some configuration settings do need to be made to enable you to use the additional and
time-specific functions.
- Touch "CFG" to open the configuration menu.
- Touch "NEXT" repeatedly to move through the main menu items of the configura-tion
menu. The Appendix contains a menu overview to make it easier for you to find speci-
fic menus.
4.3.1

"SENSOR" menu, teaching-in/deleting sensors

Refer to 3.1
4.3.2

"TIME/DATE" menu, setting the time and date

This setting is only required if DCF-synchronisation has not been performed.
- Select the "TIME/DATE" menu:
NEXT TIME/DATE
- Touch "ENTER" and the following appears:
TIME
- Touch "24H" to toggle between a 12-hour and a 24-hour clock display.
- Touch "TIME" and the following appears:
YEAR
- Touch "+" or "-" to set the year.
- Touch "YEAR" and the following appears:
MONTH
- Touch "+" or "-" to set the month.
- Touch "MONTH" and the following appears:
DAY
- Touch "+" or "-" to set the day of the month.
- Touch "DAY" and the following appears:
56
ENTER
24H
+ 2006 -
+ 07 -
+ 01 -
WEEKDAY
- Touch "+" or "-" to set the day of the week.
- Touch "WEEKDAY" and the following appears:
HOUR
- Touch "+" or "-" to set the hour.
- Touch "HOUR" and the following appears:
MINUTE
- Touch "+" or "-" to set the minute.
- Wait for a few seconds. The time and date will then appear on the display, along with
the sunrise and sunset times for the factory-set location (52.5/13.4 degrees, Berlin)
and the current moon phase.
4.3.3

"UNITS" menu, setting the display units

- Select the "UNITS" menu:
NEXT UNITS
- Touch "ENTER" and the following appears:
TEMPERATURE
- Touch "DEG" to toggle between displaying temperature values in degrees Celsius (C)
and Fahrenheit (F).
- Touch "TEMPERATURE" and the following appears:
PRESSURE
- Touch "HPA" to toggle between displaying barometric pressure values in hPa (HPA),
mmHg (MMHG) and inHg (INHG).
- Touch "PRESSURE" and the following appears:
RAIN
- Touch "MM" to toggle between displaying rainfall values in mm (MM), inches (INCH)
and l/m2 (L/M2).
- Wait for a few seconds. The data will then appear on the display in the units you have
just set.
+ MON -
+ 01 -
+ 01 -
ENTER
DEG C
HPA
MM
57