Mode Setting Dip Switches - Sony XC-HR90 Technical Manual

Mode Setting DIP Switches

You can set the mode using the DIP switches located on the rear of the camera.
Rear panel
The normal shutter cannot be used in partial scan mode. To control the exposure time in partial scan mode, set the mode to

restart/reset mode or external trigger shutter mode (controlling the trigger pulse width).
DIP switches
Switches 1 to 4: Selecting the shutter
speed  (page 16)
Switches 5 and 0: Select the partial scan
mode  (page 20)
Switches 6 to 8: Selecting the trigger
shutter mode (page 22)
Switch 0: Selecting the binning mode
(OFF/ON) (page 14)
Mode Setting
13