Mode Setting Dip Switches - Sony XC-HR90 Technical Manual

Mode Setting DIP Switches

You can set the mode using the DIP switches located
on the rear of the camera.
Rear panel
* The normal shutter cannot be used in partial scan mode. To control the
exposure time in partial scan mode, set the mode to restart/reset mode or
external trigger shutter mode (controlling the trigger pulse width).
DIP switches
Switches 1 to 4: Selecting the shutter
speed * (page 16)
Switches 5 and 0: Select the partial scan
mode * (page 20)
Switches 6 to 8: Selecting the trigger
shutter mode (page 22)
Switch 0: Selecting the binning mode
(OFF/ON) (page 14)
Mode Settings
13