Adding User Codes With The Mastercode Enabled - Kwikset SmartCode 912 Programming And Troubleshooting Manual

C

Adding User Codes with the Mastercode Enabled

The procedure for adding user codes is different when the Mastercode is enabled. For instuctions on how
to add user codes when the Mastercode is disabled, see the Installation and User Guide that came with
your lock.
1. Keep door open. Press the Program button once. The keypad will fl ash
green and you will hear three beeps.
2. Enter Mastercode.
3. Press Lock button once.
Technical Support
1-866-863-6584
www.kwikset.com
4. Press the Program button the number of times that corresponds to
the user code position being programmed.
Example: If programming the third code, press the button three times.
5. Enter new user code.
6. Press Lock button once.
3 / 11
62813 / 01
Procedure continued on next page
©2015 Spectrum Brands, Inc.