Registration (Pairing) - Motorola MBP43 User Manual

2. If the parent unit is turned ON, when the adapter is plugged in, the
battery icon in the screen's top right corner will show that the battery
is charging by cycling the internal segments, The Blue LED in the
top left corner lights up to indicate the adapter is plugged in.
2.4

Registration (Pairing)

The Baby monitor is pre-registered to your Parent Unit. You do not need
to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the
procedure below:
M
1. Press the
pop up.
<
2. Press the
and the /
+
3. Press the
the OK button to confirm.
C C
4. 1 / 2 /
DOWN button to select the desired CAM and press the OK button to
start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button underneath the baby unit until the
parent unit finds the camera, beeps and the video from the camera
appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
10
Menu button of the parent unit and the menu bar will
LEFT button or
+
/ / menu will pop up.
-
UP button or
C C
3 / 4 will pop up, press the
>
RIGHT button until
DOWN button to select
C
is highlighted,
+
, and press
+
UP button or
Getting Started
-