U-Line 3018RGL User Manual page 62

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
Fan Delay
Up
Down
The Fan Delay menu option allows the modification of fan
run times during and after a cooling cycle. In order to
allow time for the evaporator to properly cool, the
evaporator fan is delayed from starting with the cooling
cycle for a given amount of time. In order to remove as
much warmth as possible from the cabinet the evaporator
fan will continue to run at the end of the cooling cycle for
a given amount of time.
Fan Delay On=
"Fan Delay On" is the amount of time in minutes the fan
will be delayed from starting from the beginning of a
cooling cycle.
Fan Delay Off=
"Fan Delay Off" is the amount of time in minutes the fan
will continue to run at the end of a cooling cycle.
To access Fan Delay
1. Use Down to select "Fan Delay".
2. Press Select .
To alter fan settings.
3. Use Down to select either "Fan Delay On" or "Fan
Delay Off" and press Select
begin to flash.
4. Press Up or Down
5. Press Select to confirm.
Select
RETURN TO MENU
FAN DELAY
FAN DELAY ON = 1
FAN DELAY OFF = 2
. The chosen option will
to change settings.
To exit Fan Delay use Up
and press Select to confirm.
USB Port
Up
Down
The USB Port menu option allows the selection of a
communication mode. The 3000 Series can communicate
either via TTY to a PC or log diagnostic information
directly to a USB flash disk.
ID Communication
PC Link PC TTY
Flash USB Flash Drive
To access USB Port
1. Use Down to select "USB Port".
2. Press Select .
To alter communication settings.
3. Use Down to select the current setting and press
Select .
4. Press Up or Down
5. Press Select to confirm.
To exit "USB Port" use Up
and press Select to confirm.
u-line.com
to select "Return to Menu"
Select
RETURN TO MENU
USB PORT
PC Link
to change settings.
to select "Return to Menu"
Control Operation - Service 8