U-Line 3018RGL User Manual page 61

USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
6. Press Select to confirm setting.
To exit the Set Points menu use Up
Menu" and press Select
Factory Default
Up
Down
Factory Default will restore all settings to their factory
default.
To access Factory Default
1. Use Down to select "Factory Default".
2. Press Select .
To restore settings to their factory default.
3. Use Down to select "Restore?" and press Select
4. "Restore?" will change to "Restoring..." while settings
are restored. When restoration is complete,
"Restoring..." will return to "Restore?".
To exit Factory Default use Up
Menu" and press Select
to select "Return to
to confirm.
Select
RETURN TO MENU
FACTORY DEFAULT
RESTORE?
to select "Return to
to confirm.
Re-Select Model
Up
Down
NOTICE
Before altering model selection U-Line customer
service must be notified. Failure to notify
customer service will result in voiding of the
manufacturer warranty.
Re-Select Model allows the units model information to be
modified. Changing the units model completely
reprograms available zones, relay assignments, DC output
assignments etc.
To access Re-Select Model
1. Use Down to select "Re-Select Model".
2. Press Select .
To alter model setting.
3. Use Down to select "Model=" and press Select
"Model" will begin to flash.
4. Press Up or Down
available model.
5. Press Select to confirm.
To exit Re-Select Model use Up
Menu" and press Select
u-line.com
Select
RETURN TO MENU
RE-SELECT MODEL #
3018R
to scroll through each
to select "Return to
to confirm.
Control Operation - Service 7
.