Installation; The Following Options Are Available; Balanced Analog Connections; Unbalanced Analog Connections - Marantz CDR631 User Manual

INSTALLATION

The numbers between parentheses refer to the fold-out.
This CD-Recorder can be used to record from any digital or
analog audio source, either directly or through a mixer/pre-am-
plifier. In addition, this unit can also be used as a regular CD
player.
For correct connection to other audio equipement, please refer
to the operating instructions for those units.

The following options are available:

-

Balanced analog connections

-

Unbalanced analog connections

-

Digital AES/EBU connections

- Digital SPDIF connections
- Digital Optical connections
- Digital cascade connections
Balanced analog connections
1 For recording, connect an analog balanced cable from
the CD-Recorder to a source based on the diagram be-
low:
CD RECORDER CDR631
IR
Recordable
ReWritable
STANDBY
POWER HEADPHONE
0
1
Mixer/Pre-Amp,
DAT, CD/R,etc.
2 Set INPUT SELECT switch (31) to BALANCED IN.
R L
BALANCED
IN
R -TRIM- L
0 +22 0 +22
(REF=+16dBu/0dBFS)
Note:
- The default (set at factory) input level is +16dBu / 0dBFS. If
you want to change the level, rotate the TRIM control (30) to
adjust input level for both L and R.
R L
BALANCED
IN
R -TRIM- L
0 +22 0 +22
(REF=+16dBu/0dBFS)
- Make sure that all balanced inpnts do not carry phantom
power. It may damage the unit.
CDR631(U)_Eng_P01-11.p65 5
REC MODE TR.INCR. RANDOM REPEAT
DELETE STORE
FINAL ERASE CANCL MENU
TIME 1 2 3 4 5 PROG
LEVEL 9 0
TEXT 6 7 8 INPUT
REC LEVEL/SELECT
10 PUSH ENTER
ANALOG
R L
BALANCED
IN
2
BALANCED
OUT
R L
3
COLD(-)
IN OUT
L
R
INPUT
SELECT
COLD(-)
IN OUT
L
R
INPUT
SELECT
Unbalanced analog connections
1 For recording and playing, connect the CD-Recorder to
other equipment based on the diagram below:
CD RECORDER CDR631
IR
Recordable ReWritable
STANDBY
POWER HEADPHONE LEVEL
0
3
ANALOG
L L
R R
I NPUT OUTP UT
Mixer/Pre-Amp,
DAT, CD/R,etc.
2 Set INPUT SELECT switch (31) to ANALOG L/R (RCA).
R L
BALANCED
IN
R -TRIM- L
0 +22 0 +22
INPUT
(REF=+16dBu/0dBFS)
SELECT
Note:
Never connect the CD recorder to the PHONO input on a Pre-
Amp or Receiever.
Digital AES/EBU connections
1 For recording, connect a balanced cable from the CD-
Recorder to a source based on the diagram below:
CD RECORDER CDR631
IR
Recordable
ReWritable
STANDBY
POWER HEADPHONE LEVEL
0 10
AES/EBU
5
OUTPUT
Mixer/Pre-Amp,
DAT, CD/R,etc.
2 Set AES/EBU SPDIF switch (34) to AES/EBU.
NEUTRIK
IN
AES/EBU
SPDIF
IN
(SPDIF)
5
8/4/00, 9:29 AM
REC MODE TR.INCR. RANDOM REPEAT
DELETE STORE
FINAL ERASE CANCL MENU
TIME 1 2 3 4 5 PROG
TEXT 6 7 8 9 0 INPUT
REC LEVEL/SELECT
10 PUSH ENTER
ANALOG
IN OUT
L
4
R
ANALOG
L L
R R
IN P UT OU TP UT
Mixer/Pre-Amp,
DAT, CD/R,etc.
3
COLD(-)
IN OUT
L
R
REC MODE TR.INCR. RANDOM REPEAT
DELETE STORE
FINAL ERASE CANCL MENU
TIME 1 2 3 4 5 PROG
TEXT 6 7 8 9 0 INPUT
REC LEVEL/SELECT
PUSH ENTER
DIGITAL
IN
DIGITAL
LOOP
OUT
OUT