Foamer Cleaning; Mixer Rinsing; Descaling - WMF Presto User Manual

Software | Care

Foamer cleaning

™ Touch
foamer cleaning
Foamer cleaning starts.
Optional Plug&Clean cleaning.
Foamer cleaning is carried out automatically as an
integral part of the full cleaning program.

Mixer rinsing

™ Touch
mixer rinsing
Mixer rinsing starts.
Mixer rinsing is performed automatically by the cleaning
program when a mixer system is installed.

Descaling

The water hardness, the water flow, and whether a water
filter is used determine the schedule for descaling. This
point in time is calculated by the WMF presto! and
displayed.
Descaling is in three stages.
• Preparation
• Descaling
• Rinsing
Do not drink the descaling solution that comes out of the
combi spout during descaling!
Use only WMF Descaling Agent. Any other descaling
agent may cause damage to the coffee machine. No
liability is accepted for damage caused by the use of any
other descaling agent and guarantee / warranty claims
are not entertained.
24
foamer cleaning
w C leaning program
Caution
Hot liquids in the
dispensing area.
Observe the Safety chapter.
mixer rinsing
Caution
Hot liquids in the
dispensing area.
Observe the Safety chapter.
descaling
Total duration of descaling approx.
80 minutes.
The procedure may not be
interrupted.
Caution
Descaling agents are
irritants. Always follow
the instructions on the
package.
Observe the Safety chapter.
User Manual WMF presto!