User Manual of Digital Video Recorder
2. Click the icon
on the playback control toolbar to enter Smart Search mode. The smart search toolbar
appears at the bottom of the screen.
3. Click-and-drag the mouse to draw area(s) for smart search.
You can click the icon
Multi-area and full-screen searching modes are supported.
4. Click the icon
to start the smart search, and the motion events occurred in the defined area will be
marked as
on the time bar.
Figure 6. 23 Interface of Playback by Time
to set the full screen as target searching area.
Figure 6. 24 Draw Area of Smart Search
84