Table of Contents
Advertisement
User Manual of Digital Video Recorder
Steps:
1.
Enter the Camera Management interface.
Menu> Camera> Camera
In Analog Camera Management interface, the status of analog cameras is displayed. Disabling the
analog camera can be done by clearing the checkbox of the analog camera No.. One network camera
can be added by disabling one analog camera. 16 /8 /4 network cameras can be added to the H20HVR
series when all the analog cameras are enabled. 32 /16 /8 network cameras can be added to H20HVR
series at most when all the analog cameras are disabled.
2. Click the IP Camera tab to enter the IP Camera Management interface. The online cameras in the same
network segment with the device will be displayed on a camera list. You can click the button Refresh to
get the latest status of the IP cameras.
3.
Click the icon
or click the button Add All to add all the online cameras automatically.
The icon
indicates the added camera works properly and you can click the icon to get the live video of
the camera.
Figure 2. 14 Analog Camera Management
Figure 2. 15 IP Camera Management-1
on the list, and the corresponding camera will be added automatically;
Figure 2. 16 P Camera Management-2
27
Advertisement
Table of Contents
