Table of Contents
Advertisement
User Manual of Digital Video Recorder
two key points and the duration time at each key point separately programmable. The key points are
corresponding to the presets.
Steps:
1.
Enter the PTZ Control interface.
Menu > Camera > PTZ > More Settings
2.
Select the patrol number from the drop-down list.
3.
Click
under Patrol drop-down list to add key points for the patrol.
4. Configure key point parameters, such as the preset No., duration of staying for one key point and speed of
patrol. The key point is corresponding to the preset. The Preset determines the order at which the PTZ
will follow while cycling through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move from one key point to
the next.
5.
Click OK to save the key point to the patrol.
Repeat the above steps to add more key points.
You can also click
to delete the corresponding key point and click
Figure 4. 6 PTZ- Add Key Point
Figure 4. 7 Key point Configuration
44
to delete all the key points.
Advertisement
Table of Contents
