Table of Contents
Advertisement
User Manual of Digital Video Recorder
time according to the actual needs.
If Manually Clear is set as the alarm dwell time, and you can only clear the alarm by clicking the
button Clear All on the Manual Alarm Settings interface (Menu > Manual > Alarm).
3. Click the icon
to configure the alarm output settings. Select a day in the week and then set the time
periods for alarm output arming schedule. Click Apply to save the settings, and click OK to exit.
Figure 8. 24 Set Arming Schedule of Alarm Output
Up to 8 time periods can be set for each day and the time periods cannot be overlapped.
4.
Click Apply on the Alarm Output Settings interface to save the settings
5.
Repeat the above steps to configure the alarm output settings for other channels.
Optionally, you can click Copy on the Alarm Output Settings interface to copy the settings to other channels.
Figure 8. 25 Copy Settings of Alarm Output
112
Advertisement
Table of Contents
