Table of Contents
Advertisement
User Manual of Digital Video Recorder
Figure 8. 3 Set Trigger Camera of Motion Detection
6. Click the Arming Schedule tab, select a day in the week and then set the time periods for motion
detection arming schedule. Click Apply to save the settings.
Figure 8. 4 Set Arming Schedule of Motion Detection
Up to 8 time periods can be set for each day and the time periods cannot be overlapped.
7. Click the Linkage Action tab, and select the alarm linkage actions of motion detection. Click Apply to
save the settings, and click OK to exit. For details of the linkage actions, see Chapter 8.6 Setting Alarm
Linkage Actions.
Figure 8. 5 Set Alarm Linkage Actions of Motion Detection
8. Click Apply on the Motion Detection Settings interface to save the settings
9. Repeat the above steps to configure the motion detection settings for other channels.
Optionally, you can click Copy on the Motion Detection Settings interface to copy the settings to other
channels.
You cannot copy the linkage action of Trigger Channel to other channels.
You cannot copy the motion detection settings to IP cameras.
101
Advertisement
Table of Contents
