Advertisement
BT Decor 1571 ~ Issue 4 ~ 1st Edition ~ 27th August '03 ~ 5599
At a glance
One-Touch buttons
1571/Quickdial button
When in 1571 mode, press to play,
Press and hold to
save and delete your voicemail
automatically dial 1571 to
messages.
easily access BT Answer
1571 or Call Minder.
Also used to store and automatically
dial up to three numbers at the touch
Also allows you to dial
of one button.
up to ten numbers
stored in the Quickdial
memory at the touch of
two buttons.
Call/Message Waiting
indicator light
Flashes to indicate you
have new voice messages
BT Decor 1571
waiting to be played.
Also flashes to indicate
an incoming call, or when
you are storing numbers,
M1
Play
M2
Save
using secrecy or setting
M3
Delete
1571
the ringer.
Quickdial
1
2
3
Store button
Use to store numbers in
4
5
6
Store
the memory and to
change the ringer and
7
8
9
R
pitch volume.
0
S
Recall button
For use with a
Redial
switchboard/PBX and
BT Calling Features.
Please contact your
switchboard supplier for
more information. For
more information on
BT's Calling Features
please call Freefone
0800 800152
Redial/Pause button
Secrecy button
Redials the last number called. Also,
Lets you talk to someone
press to enter a pause when storing a
in the same room without
number in the memory.
the person you are calling
hearing you.
Handset hook
Keeps the handset in place when
the BT Decor 1571 is wall mounted.
See back page for more information.
Revolve the handset catch on the
base unit. The handset will now be
able to rest on the hook when
wall-mounted.
BT Decor 1571 ~ Issue 4 ~ 1st Edition ~ 27th August '03 ~ 5599
Safety information
General
Simply clean your BT Decor 1571
with a damp (not wet) cloth, or an
anti-static wipe. Never use household
polish as this may damage the
product. Never use a dry cloth as this
may cause static shock.
Do not open the BT Decor 1571.
This could expose you to high
voltages or other risks.
Never dispose of batteries in a fire.
There is a serious risk of explosion
and/or the release of highly toxic
Note
chemicals.
You will still be able to make and
receive calls via the handset
Environmental
without a battery fitted. However,
Do not expose to direct sunlight.
the message waiting indicator
will not function.
We recommend that you do not place
the product on antique/veneered
wood to avoid damage.
Battery low indicator
Do not stand your product on carpets
or other surfaces which generate
If the battery is nearing the end
fibres, or place it in locations
of its useful life, a single beep will
preventing free flow of air over its
be heard every 10 seconds to
surfaces.
indicate that you need to change
Do not submerge any part of your
the battery.
product in water and do not use it in
damp or humid conditions, such as
2. Plug your BT Decor
in bathrooms.
1571 into the telephone
Do not expose your product to
socket.
fire, explosive or other hazardous
conditions.
Your BT Decor 1571 is now ready
for use.
Setting up
Using the
Plan the location of your
BT Decor 1571.
telephone
Situate your BT Decor 1571 close
enough to a phone socket so that
the line cord will reach.
Making and ending calls
You can wall-mount your product,
see back page.
To make a call
Lift the handset and wait for the
1. Insert the battery
dial tone.
Please note you will require
1 x PP3 9 Volt battery. This is not
Dial the telephone number.
included.
To end a call
Lift the battery cover and insert
the battery as shown opposite.
Replace the handset.
BT Decor 1571 ~ Issue 4 ~ 1st Edition ~ 27th August '03 ~ 5599
To receive a call
Note
When the telephone rings the call
indicator light will also flash to
If the ringer is set to OFF, the call
indicator light will still flash to
indicate that there is an incoming
indicate someone is calling you.
call. Simply pick up the handset.
To redial the last number called
To set the ringer pitch
Lift the handset.
The ringer pitch can be set to
Press the REDIAL button.
HIGH or LOW. The default setting
is HIGH.
The last number called is dialled.
Lift the handset and press the
A redial number can be no longer
STORE button. The call indicator
than 32 digits.
light will flash.
Press the
#
button.
Secrecy
Press either, 1 for HIGH or 2 for
When on a call you can talk to
LOW.
someone in the same room,
without your caller hearing.
Press the STORE button.
You will hear a confirmation tone.
To switch secrecy on and off
Replace the handset.
During a call press and release
the SECRECY button.
One-Touch memories
The call indicator light will flash
You can store your three most
to show that secrecy is on.
frequently used telephone numbers
Your caller will be put on hold.
in the One-Touch memories
You can now talk to someone in
(M1, M2 or M3). Please note that
the room without your caller
the number can be no longer than
hearing you.
18 digits.
Press and release the SECRECY
button again to return to your
To store a One-Touch number
caller.
Lift the handset.
Press the STORE button. The call
Note
indicator light will flash.
During all storing operations
Press the memory location number,
,
,
the call indicator light will flash.
(M1
M2
M3), under which you
want to store the number.
Enter the telephone number you
To adjust the ringer volume
want to store including the area
code if applicable.
There are 3 volume settings to
choose from: HIGH, LOW or OFF.
Press the STORE button.
The default setting is HIGH.
You will hear a confirmation tone.
Lift the handset and press the
Replace the handset.
STORE button. The call indicator
light will flash.
Press the
button.
Note
Press either, 1 for HIGH, 2 for
Whilst storing a number in
LOW or 3 for OFF.
the memory you can cancel the
operation by replacing the
Press the STORE button.
handset on the cradle.
You will hear a confirmation tone.
Replace the handset.
BT Decor 1571 ~ Issue 4 ~ 1st Edition ~ 27th August '03 ~ 5599
To dial a One-Touch number
To dial a number in the
Quickdial memory
Lift the handset and wait for the
dial tone.
Lift the handset and wait for the
dial tone.
Press the memory location
number, (M1
,
M2
,
M3), under
Press the 1571/QUICKDIAL
which the number is stored.
button.
The number is dialled
Press the memory location
automatically.
number between 0 and 9, under
which the number is stored.
To insert a pause in a
The number is dialled
memory number
automatically.
Sometimes you may need to enter
a pause when storing a number,
Note
e.g. with an overseas number you
may need to enter a pause after
You can mix manual and
storing the international code.
memory dialling as required,
Press the REDIAL button in the
for example, you can dial the
place where you want to enter a
area code 020 8304 from the
pause.
memory and then complete the
number manually.
When you dial the number your BT
Decor 1571 will automatically insert
the pause where you stored it.
To delete stored numbers
Quickdial memories
You can store a further 10
Lift the handset.
telephone numbers in the Quickdial
Press the STORE button.
memories. Please note that the
The call indicator light will flash.
numbers can be no longer than 18
digits long.
Press the memory location
number (0-9) or (M1
,
M2
To store a number in the
under which you have stored the
Quickdial memory
number you wish to delete.
Lift the handset.
Press the STORE button. You will
Press the STORE button.
hear a confirmation tone. Replace
The call indicator light will flash.
the handset.
Press the memory location
Alternatively, any existing
number between 0 and 9 under
number stored in the Quickdial
which you want to store the
or One-Touch memories can be
number.
overwritten by entering a new
number under the same memory
Enter the telephone number you
location. Simply follow the
want to store including the area
instructions under the storing
code if applicable.
numbers sections previously
Press the STORE button.
shown.
You will hear a confirmation tone.
Replace the handset.
Note
If any error occurs in the
Note
storing mode you will hear three
short beeps, then the product
There is a quickdial memory
will return to talk mode.
label on your telephone. Lift the
plastic plate up and you can
If you unplug your BT Decor
write on the label to keep a
1571 the numbers stored in the
record of which memory
memory will be saved. However,
location number you have used
the last number redial memory
for each telephone number.
will be lost.
,
M3)
Advertisement
