Sharp UX-E800 Operation Manual page 159

Fax polling (Requesting a Fax Transmission)
Being polled (polling standby)
To let another fax machine poll your fax, press the RECEPTION
MODE key to set the reception mode to FAX and load the
document(s).
Transmission will take place when the other fax machine calls your
machine and activates polling. Automatic reception is possible while
your fax is on polling standby.
Polling security
Polling Security allows you to prevent unauthorized polling of your
machine. When this function is turned on, polling will only take place
when the fax number of the polling fax machine has been entered in
your machine's list of permitted fax numbers (called "passcode
numbers"). The number of the polling fax must also be correctly
programmed into itself for identification.
To use Polling Security, follow the steps below to turn the function on,
and then enter permitted numbers as shown on the following page.
1
Press these keys:
The display will show:
SECURITY SELECT
1=ON, 2=OFF
2
Press 1 to turn polling security on, or
2 to turn it off.
3
Press the START key and then the
STOP key.
158
FUNCTION
3
VOLUME
YES NO
1 2
or
START
Press
3 times
STOP