Network Settings
Configure initial settings for the network. When
[Network] is set to [Use], the MAC address will appear at
the top of the screen.
1
In the [System Admin Settings] screen, use the V , v ,
B , and b buttons to select [Network Settings], and
press the ENTER button.
The [Network Settings] screen appears.
2
Use the B and b buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
"[Network] Tab" (page 69)
"[File Server] Tab" (page 70)
"[NTP] Tab" (page 71)
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
[Network] Tab
Configure these settings when using a network.
1
Use the B and b buttons to select the [Network] tab.
2
Use the V and v buttons to select the [Network] box,
and press the ENTER button.
The [Network] screen appears.
3
Use the V and v buttons to select [Use], and press the
ENTER button.
4
Configure each setting.
Select an item using the V and v buttons, and press the
ENTER button to display the setting screen for that
item.
69
Network Settings