Protecting Recorded Data - Sony HVO-500MD Instruction Manual

3
Select the check box of the recorded data for which
you want to edit patient information.
Select recorded data using the V and v buttons, and
press the ENTER button to select or clear the check
box.
Tip
You can only edit patient information for one recorded
data entry at a time. If multiple recorded data entries
are selected, patient information editing will be
disabled.
4
Use the V , v , B , and b buttons to select [Execute], and
press the ENTER button.
The [Change] screen appears.
5
Edit each item as necessary.
Select an item using the V , v , B , and b buttons, and
press the ENTER button to display the setting screen
for that item.
46
Processing Recorded Data
For details on each item, see "Patient Information and
Data Storage Settings" (page 37).
6
Use the V , v , B , and b buttons to select [Execute], and
press the ENTER button.
The patient information is changed, and the
[Recording List] screen appears again.

Protecting Recorded Data

You can protect data to prevent accidental deletion.
Recorded data can be protected or protection can be
removed from the [Recording List] screen.
To select data for protection from the
[Recording List] screen
This section describes how to select recorded data for
protection in the [Recording List] screen.
1
Display the [Recording List] screen, use the V , v , B ,
and b buttons to select the operation box, and press the
ENTER button.
For details on displaying the [Recording List] Screen,
see "Image Search" (page 40).
The following screen appears.