Sony HVO-500MD Instruction Manual page 58

Assignable
function
Input Signal Select
Recording
Preparation
Recording List
Status Display ON/
OFF
Set Chapter
Test Record
Finalize
(HVO-550MD only)
[Show Status]
Select whether to display various status information.
[Advanced] button appears when you select [Use].
For details on this setting, see "To configure advanced
status display settings" (page 59).
[Display Logo]
Select whether to display a logo in the [MENU] screen
in the setting screen that appears, and press the
ENTER button.
The default setting is [Not Used].
If you want to select [Use], be sure to import the logo.
For details on importing, see "To import a logo"
(page 59).
58
Function Settings
Description
Switch the input signal.
The input signal switches as
follows with each press: HDMI t
DVI-D t VIDEO t S VIDEO.
Display the [Recording
Preparation] screen.
Display the [Recording List]
screen.
Show or hide the status display.
Set a chapter.
Perform a test recording.
Perform finalizing.
[Recovery]
Select whether to return to the action that was being
performed when a recovery operation was executed in
the setting screen that appears, and press the ENTER
button.
The default setting is [Use].
Recovery of recorded data is the only action
performed when [Not Used] is selected.
[Auto Eject DVD] (HVO-550MD only)
Select whether to automatically eject DVD discs when
they are full in the setting screen that appears, and
press the ENTER button.
The default setting is [Not Used].
[Auto Finalize] (HVO-550MD only)
Select whether to automatically finalize a DVD disc in
the setting screen that appears, and press the ENTER
button.
[Advanced] appears when [Use] is selected.
For details on this setting, see "To configure advanced
finalization settings (HVO-550MD only)" (page 60).
3
To configure settings in other tabs, use the V , v , B ,
and b buttons to select a tab.