For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
Tip
The password is not configured under default
conditions. When configuring the password for the
first time, configure the new password in the [Change
Password] screen without entering an old password.
[New Password]
Enter up to 255 characters for the new password using
the on-screen keyboard.
Any character that can be entered on the on-screen
keyboard can be used in the password.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
[Check New Password]
Reenter the new password using the on-screen
keyboard.
For details on using the on-screen keyboard, see
"Using the On-Screen Keyboard" (page 29).
3
Use the V and v buttons to select [Apply], and press
the ENTER button.
The new password is saved.
Network Settings
Configure initial settings related to the network and server.
1
In the [System Admin Settings] screen, use the V , v ,
B , and b buttons to select [Network Settings], and
press the ENTER button.
The [Network Settings] screen appears.
2
Use the B and b buttons to select a tab, and configure
settings as necessary.
For details on each tab, see the following.
"[Network] Tab" (page 83)
"[File Server] Tab" (page 85)
"[NTP] Tab" (page 85)
3
When you finish configuration, use the V , v , B , and b
buttons to select [Apply], and press the ENTER
button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
[Network] Tab
Configure these settings when using a network.
1
Use the B and b buttons to select the [Network] tab.
83
Network Settings