Features And Controls - Murray 1695859 User Manual

A
B
Snowthrower Controls
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to use one of six
(6) forward and two (2) reverse speeds. To shift, move speed
select lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe damage to
drive system.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage push down, to disengage
release.
C. Chute Rotation Crank — Used to rotate the discharge chute
to the left or right.
D. Chute Deflector Wing Nut — Used to control the angle of
the chute deflector (up or down).
C
I
G

FEATURES AND CONTROLS

F
E
E. Free-Hand Control — After engaging the traction control
TM
(left hand) and auger control (right hand), allows the operator
to release the auger control lever to use the other controls.
F. Traction Control Lever — Used to propel snowthrower
forward or reverse. Push down to engage, release to
disengage.
G. Skid Shoe — Used to adjust ground clearance of auger
housing.
H. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
I. Headlight — Used to operate the snowthrower in poor
lighting conditions.
1 2
D
H
17