Step 4: Waterproof And Connect The Cable - LevelOne FCS-5056 User Manual

Step 4: Waterproof and Connect the Cable

If the camera will be installed indoors, simply connect the network side cable to the camera
Ethernet port. No need to waterproof the cable connection. However, if the camera will be
installed outdoors, check the type of Ethernet port and follow the applicable procedures to
waterproof the cable connection.
Type of Ethernet Port
Square-Shaped
Hardware Manual
Description
There are three (3) ways to manage and waterproof
the square-shaped "pigtail":

Using the Waterproof

Using the Bundled Conduit
14. A flexible conduit (trade size ½") is required
to house the Ethernet cable.

Replacing the Pre-Installed Square-Shaped
see page 19.
12
Tape, see page 13.
Gland, see page
,