Step 4: Waterproof And Connect The Cable - LevelOne FCS-5057 Hardware User Manual

Step 4: Waterproof and Connect the Cable

The camera and the pre-installed network cable, "pigtail", are resistant to salt, water, weak acid,
alcohol, oil, grease and other common solvents. However, users must ensure that the cable
connection and the network side cable itself are also protected from different environmental
factors.
For Ethernet connection, there are two waterproofing methods.
Bundled Accessory
Cable Gland
Conduit Gland
Audio and digital input/output devices can be connected to the camera, for more information,
see Other Connections
Hardware Manual
Description
Use this solution when connecting an Exterior-grade
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch or injector. See
Use the Cable Gland
Use this solution when connecting a standard indoor
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch / injector. A flexible
conduit (trade size 1/2") is required to house the Ethernet
cable. See How to Use the Conduit Gland
NOTE: The flex conduit is not included in the package
and must be purchased separately.
on page 23.
14
on page 15.
on page 18.
How to