Network Failure Detection - LevelOne FCS-5061 User Manual

6.3.10

Network Failure Detection

Network Failure Detection allows the IP Camera to ping another IP device (e.g.
NVR, VSS, Video Server, etc.) within the network periodically and generates
some actions in case of network failure occurs, for instance, a Video Server is
somehow disconnected.
Being capable of implementing local recording (through Micro SD card) when
network failure happens, the IP Camera could be a backup recording device for
the surveillance system.
Detection Switch
You will be able to turn on/off Network Failure Detection in System section.
Default setting is Off.
Detection Type
Input the IP device address and the period of ping time to ping. The ping time
setting range is from 1 to 99 minutes.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when network failure
is detected. All options are listed as follows:
56
Enable Alarm Output
Select the item to enable alarm relay output
Record Stream to SD Card