objects (except read-only objects). The default value is "write".
Traps for SNMP v1/ v2
Traps are used by the IP Camera to send massages to a management system
for important events or status changes.
Enable Traps
Check the box to activate trap reporting.
Trap address
Enter the IP address of the management server.
Trap community
Enter the community to use when sending a trap message to the management
system.
Trap Option
Warm Start
A Warm Start SNMP trap signifies that the SNMP device, i.e. IP Camera,
performs software reload.
Click on <Save> button when complete.
42