LevelOne FCS-5061 User Manual page 37

Use fixed IP address
To setup static IP address, select <Use fixed IP address> and move the cursor
to the IP address blank and insert the new IP address, ex. 192.168.7.123; then
go to the Default gateway (explained later) blank and change the setting, ex.
192.168.7.254. Click on <Save> to confirm the new setting.
When using static IP address to login to the IP Camera, users can access it
either through "DeviceSearch" software or input the IP address in the URL bar
and click on <Enter>.Click the category: <Security>, there will be a drop-down
menu with tabs including <User>, <HTTPS>, <IP Filter>, and <IEEE 802.1X>.
IP address
This is necessary for network identification.
Subnet mask
It is used to determine if the destination is in the same subnet. The default
value is "255.255.255.0".
Default gateway
This is the gateway used to forward frames to destinations in different
subnet. Invalid gateway setting will fail the transmission to destinations in
different subnet.
Primary DNS
Primary DNS is the primary domain name server that translates hostnames
into IP addresses.
Secondary DNS
Secondary DNS is a secondary domain name server that backups the
primary DNS.
Use PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields,
and click on the <Save> button to complete the setting.
Advanced
Web Server port
The default web server port is 80. Once the port is changed, the user must be
notified the change for the connection to be successful. For instance, when the
37