Table of Contents
Advertisement
3. Please enable port forwarding in the router which the IP camera
connected. You may need to consult the manufacturer of your
router. Note: Your router may require a reboot after port
forwarding had been set.
The above is a sample illustration of what you need to do in order
to enable remote viewing of the IP camera.
4. Once the above steps are done, you should be able to log-on to the
camera from a remote location. Please type in the DDNS address or
the static IP address depending on your configuration. For example,
in this case, you should enter
Internet Explorer to gain access to the camera.
Note: If you have multiple cameras installed on a network, you will
need to change the HTTP and RTSP port on the cameras manually
so each one of them will have a unique port. E.g. you may wish to
change the HTTP and RTSP server ports on the 2
and 554 respectively. You can access the 2
http://61.220.20.16:81.
http://61.220.20.16:80
nd
camera by typing in
into the
nd
camera to 81
39
Advertisement
Table of Contents
