Table of Contents
Advertisement
6. If user wants to add the new IP camera manually, please enter
"Camera Name", "IP Address", "User Name", and "Password".
The default user name and password is "admin".
7. After IP Camera device is decided, the following option could let
user to change "Manufacture", "Model", "Format", "Frame Rate",
"Resolution", "Compression", "Rotation", "Enable Audio", "Enable
IO", and "Enable PTZ". After all the selections are ready, presses
the OK button to close the IP Camera setting.
8. Upon IP Camera Setup is completed, please press "Apply" button
to Memorized the setting and then press "OK" button to close the
setup dialog.
9. After the IP camera setting is completed, please wait a while for
connection. After user see the image on the screen, and then user
could start to execute the monitoring function.
29
Advertisement
Table of Contents
