Table of Contents
Advertisement
You do not have to enter any user name or password when setting
the camera unless the default had been changed.
3. When you've reached the end of the quick setup and wish to setup
more than 1 camera in the system, please check the "Use this
Wizard to set the next camera" setting and press the finish button
to repeat Step4 until all available cameras had been set.
Once the above are done, your security system had been set.
Lastly, all of the schedule, detection and recording will only be
started when you enable the "Start all" option as shown blow.
Otherwise the system will only be in passive viewing mode and no
alarms will be triggered.
Note: You will not be able to change any of the system's setting
when its "armed", you must "dis-arm" the system by selecting the
"Stop all" function.
26
Advertisement
Table of Contents
