D Include Call - Icom IC-F43GT Instruction Manaul

3
BASIC OPERATION

D Include call

The nclude call allows to make an extra call for jonng an-
other staton for the communcaton after move to a commu-
ncaton channel.
The nclude call s made when an ndvdual or group code
selecton usng a memory or keypad s performed on the
communcaton channel.
D 5-digit routing code call
The 5-dgt routng code call provdes a shortenng a callng
code nput.
When callng a staton that has a dfferent preix and/or leet
code, the 3-dgt preix and 4-dgt leet code are converted
nto 2 or 3-dgt code, therefore, enterng a total of 5-dgt
code ncludng an ndvdual or group code.
• The conversion range
Code wthn 200 to 299, 900 to 998, 20 to 29 and 90 to 99
can be converted, and set the desred preix and leet code
must be regstered n advance.
e.g.: When the staton '200 2001 200' calls the staton '211
2006 300';
➥ Regster the both preix '211' and leet '2006' to "22"
as the 5-dgt routng code— Enter "22300" and push-
ng [#] to make a 5-dgt routng code call.
16
D Call cancel
Push [ ] and [#] to cancel the call.
M
The communcaton s dsconnected, and the call s can-
celled.
D Cancelling the entered code
Durng code enterng from the keypad, pushng [Up]/[Down]
or [Backspace] to clear the prevously entered dgt code.
The entered all dgt code can be cancelled by pushng
[Clear].
D Manual call reply
When the call wth "ALERTING" ndcaton s receved, push
[#] or [PTT] to reply the call manually (off-hook).
D End of the communication
Push [ ] and [#], or push [Clear] to insh (dsconnect) the
M
communcaton (on-hook).