D Enhanced Group Call - Icom IC-F43GT Instruction Manaul

D Status call
➥ Push [
M ], [0], [xx]*, [ M ], ndvdual code and [#] n sequence
to make a status call to the desred staton.
➥ Push [
M ], [0], [xx]* and [#] n sequence to make a status
call to the despatcher.
➥ Push [
], [0] and [#] n sequence to make a Call Back Re-
M
quest status call to the despatcher
➥ Push [#], [0] and [#] n sequence to make a cancellaton
of the above Call Back Request status call to the des-
patcher.
➥ Push [
M ], [0], [ M ], ndvdual code and [#] n sequence to
make the Call Back Request status call to the ndvdual
code staton.
➥ Push [#], [0], [
], ndvdual code and [#] n sequence to
M
make the cancellaton of the above Call Back Request sta-
tus call to the ndvdual code staton.
* xx s a status code number from 00 to 31.
NOTE: The same manner as the ndvdual call (p. 12) s
used when makng an ndvdual status call to the dfferent
preix and/or leet code.
D PSTN call
Push [0], telephone number (1-dgt or more) and [#] to make
a phone call through the publc telephone network.
The system must be compatble to the PSTN.

D Enhanced group call

• Conference call
Push [ ], [1], [ ], group code and [#] n sequence to make a
M M
conference call.
All statons n the called group can be communcated wth the
conference call.
• Broadcast call
Push [ M ], [1], [1], [ M ], and group code and [#] n sequence to
make a broadcast call.
All statons n the called group can only lsten to the an-
nouncement from the callng staton.
NOTE: The same manner as the group call (p. 12) s used
when makng a conference or broadcast call to the dffer-
ent preix and/or leet code.
D SDM (Short Data Message) call
➥ Push [
M ], [2], [ M ], SDM memory number and [#] n se-
quence to make an SDM call (up to 24-dgt; ncludng
and M ) to the prevously selected staton or group.
➥ Push [
], [2], [ ], SDM memory number, ndvdual code and
M M
[#] n sequence to make an SDM call (up to 24-dgt; nclud-
ng , 2, and ndvdual code) to the desred staton.
M M
NOTE: The same manner as the ndvdual call (p. 12) s
used when makng an ndvdual SDM call to the dfferent
preix and/or leet code.
3
BASIC OPERATION
, 2
M
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
13