Attachments - JUKI MB1373 Instruction Manual

4-3. attachments

WarnInG :
to protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest.
5
2
Use
Large-sze
MB-1373
MB-1377
Schematc
drawng
Remarks Button sze :
A : 3 to 6.5 mm
B : ø20 to ø28 mm
Use
Frst process
MB-1373
MB-1377
Schematc
drawng
Remarks Thread shank heght
A : 5.5 mm
1
3
4
Flat buttons
Medum-sze
Z201 Z202
A
B B
Button sze :
A : 3 to 5 mm
B : ø12 to ø20 mm
Wrapped-around buttons
Second process
Z041 Z035
A
1) In order to nstall the attachment on the machne,
you may have to remove button clamp mecha-
nsm 1 or feed plate 2 .
2) Detach the snap rng from button clamp nstallng
stud 3 , and you wll be able to remove button
clamp mechansm assembly 1 . Remove screw
4 , and you can remove feed plate 2 .
the only feature that makes the difference
between the attachment of MB-373ns and
that of MB-377ns is button clamp lifting
hook 5 .
Shank buttons
General
Z033
A
Button dameter : Less than 16 mm
Shank sze :
Thckness : 6 to 5 mm
Wdth : 3 to 2.5 mm
Metal buttons
General
Z038
– 12 –
Snaps
Z037
Snap sze :
A : 8 mm
Stay button Labels
Z039 Z044
Common to Sttch wdth :
Z041 3 to 6.5 mm