Manitowoc K00179 Installation Instructions
Manitowoc K00179 Installation Instructions

Manitowoc K00179 Installation Instructions

On a cornelius 30.00” wide ice dispenser (enduro 200/250)

Advertisement

ON A CORNELIUS 30.00" WIDE ICE DISPENSER (ENDURO 200/250)
1. Set adapter on top of the dispenser. Be sure to position the adapter with the backside flange tight to the dispenser.
2. Using the slotted holes in the adapter as a template, drill four (4) 9/64" diameter holes at the bottom of the slots.
NOTE: Do not drill deeper than 1/4" past the sheet metal. Use a drill stop!
3. Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit.
4. Set the ice machine on top of the adapter. Align holes in ice machine front angle with the rivnuts on the adapter.
5. Secure the ice machine to the adapter with two (2) #8-32 thumbscrews supplied with the ice machine.
6. Set the front bin cover onto the dispenser. The back flange of the bin cover will latch onto the adapter.
7. Rotate retaining arms into position, as shown for normal ice machine operation.
#8-32 Thumbscrew
Two (2) Places
LH Retaining Arm
Bin Cover
Manitowoc Ice, Inc.
th
2110 South 26
Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
Web Site - www.manitowocice.com
K00179
IB-0620/0820/1020
Installation Instructions
Cornelius ED200/250 Dispenser
#8 Screw
4 Places
RH Retaining Arm
8005903
Rev. 07/08/03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K00179 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Ib-0620Ib-0820Ib-1020

Table of Contents