Calibrating Boom Valves - JLG 1250AJP Troubleshooting Manual

SECTION 5 - CALIBRATIONS

5.4 CALIBRATING BOOM VALVES

1. Position the Platform/Ground select switch to the
Ground position.
2. Plug the analyzer into the connector inside the
Ground control box.
3. Pull out the Emergency Stop switch.
5-296
4. The analyzer screen should read:
5. Use the arrow button to reach ACCESS LEVEL 2. Hit
Enter.
6. Enter the Access Code, 33271.
7. Use the arrow keys to reach CALIBRATIONS. Hit
Enter.
8. Use the arrow keys to reach Boom Valves. The
screen will read:
1250AJP 3128411