CipherLab 9500CE Reference Manual page 47

Wireless
Power
Manager
GPRS
WLAN1
Bluetooth
Manager
ReaderConfig
Software Input
Panel (SIP)
Switch Task
Note: In OS version 1.1 and later, it can display up to 5 status icons for U.S. and European
languages and up to 4 status icons for Asian languages.
Chapter 3 Windows CE Basics
It provides control of the power to the 802.11b and GPRS modules.
Double-tap any of these icons to configure the power setting.
It indicates the GPRS module is enabled. See GPRS status icon
below.
It indicates a CF card other than GPRS is enabled.
It indicates the Wi-Fi module (802.11b) is enabled. See WLAN1
status icons below.
The GPRS connection is successfully established.
Double-tap it to view status. Tap [Disconnect] if necessary.
The Wi-Fi connection fails. (= disconnected)
Double-tap it to access the Wireless Information tab for
establishing a new connection.
The Wi-Fi connection is successfully established.
Double-tap it to view or renew IP & Wireless Information.
It provides access to the Bluetooth services.
Initially, you need to double-tap the Bluetooth Manager
shortcut on the desktop so that this icon will appear on the
taskbar.
It provides access to the reader configuration utility.
Initially, you need to double -tap the ReaderConfig shortcut on
the desktop so that this icon will appear on the taskbar.
Tap it to change input method.
Tap it to switch to desktop or any task, such as a running program or
window.
37