CipherLab 9500CE Reference Manual page 105

Auto ENTER
This function can spare you the trouble of pressing the
[Enter] key on the terminal to confirm each scan. It will
automatically add an ENTER character in front or to
the end of one scan.
Auto ENTER
*Auto ENTER must be enabled.
Character
Prefix Code 0~10 characters
Suffix Code
0~10 characters
YES or NO
Include Cody Type
YES or NO
Include Cody Length
Barcode Decode
1~99 (0.1 sec.)
Timeout
Timeout When
0~99 (0.1 sec.)
Decode Same
Barcode
AIM Duration 0~99 (0.1 sec.)
RFID Settings will be displayed if the RFID reader is installed!
Check reader status When running the program, it will take a few seconds
when start session to check status of the reader, barcode reader or RFID
reader, before starting the session.
No
Scan + ENTER (time-saving)
ENTER + Scan (efficient for continuous scanning)
None
Carriage Return
Tab
Space
Comma
Semicolon
YES or NO
Chapter 5 Applications
Scan + ENTER
Carriage Return
NULL
NULL
NO (Disabled)
NO (Disabled)
3.0 seconds
1.0 seconds
0.0 seconds
YES (Enabled)
95