CipherLab 9500CE Reference Manual page 114

104 9500CE Reference Manual
Convert UPC-E0 to
UPC-A
Convert UPC-E1 to
UPC-A
Convert EAN-8 to
EAN-13
UCC Coupon
Extended Code
Linear UPC / EAN
Decode
Code 128
Enable Code 128
Enable EAN-128
Enable ISBT 128
Code 39
Enable Code 39
Enable Trioptic Code
39
Convert Code 39 to
Code 32
Code 32 Prefix
When enabled, the UPC-E0 reading will be expanded
into UPC-A. It will then be processed according to the
settings of UPC-A.
When enabled, the UPC-E1 reading will be expanded
into UPC-A. It will then be processed according to the
settings of UPC-A.
When enabled, the EAN-8 reading will be expanded
into EAN-13. It will then be processed according to the
settings of EAN-13.
When enabled, it will decode UPC-A barcodes starting
with digit "5", EAN-13 barcodes starting with digit
"99", and UPC-A/EAN-128 coupon codes.
*UPC-A, EAN-13, and EAN-128 must be enabled!
**Use "Supplemental Redundancy" to control
auto-discrimination of the EAN-128 (right half) of a
coupon code.
This applies to barcodes that contain two adjacent
blocks, such as UPC-A, EAN-8, and EAN-13.
When enabled, a barcode is transmitted only when both
the left and right blocks are successfully decoded
within one scan line.
*Enable this option when barcodes are in proximity to
each other.
Supported on 2D Reader
YES or NO
YES or NO
YES or NO
Supported on 2D Reader
YES or NO
YES or NO
Code 32 is a variant of Code 39 used by the Italian
pharmaceutical industry.
When enabled, it will decode Code 32 barcodes as
well.
*Code 39 must be enabled!
When enabled, the prefix character "A" will be added
to all Code 32 barcodes.
NO (Disabled)
NO (Disabled)
NO (Disabled)
NO (Disabled)
NO (Disabled)
Default
YES (Enabled)
YES (Enabled)
YES (Enabled)
Default
YES (Enabled)
NO (Disabled)
NO (Disabled)
NO (Disabled)