Hdbaset Link (Rj45) Connection - Binary B-520-RX-230-IR Installation Manual

FIGURE 4 : Application Diagram – Non PoC Transmitter
Note: If the receiver will be paired with a non-PoC transmitter, then both the
transmitter and receiver will need to be powered separately with an optional power
supply (B-PS-12VDC-2A).

6.1. HDBaseT Link (RJ45) Connection

This device is specified to operate with Category cables for communication between
the transmitter and receiver. The transmission path may include a maximum of two
keystones and two patch cables, as long as the total length does not exceed 200' for
Cat 5e/6 and 230' for Cat 6a/7.
TIA/EIA Standard 568-B (Gold Pins Facing Up)
Pin 1 White/Orange
Pin 2 Orange
Pin 3 White/Green
Pin 4 Blue
Note: The HDBaseT Link RJ45 connection includes a 12V signal. Do not connect
anything to this port other than an HDBaseT transmitter or receiver.
B-520-TX-230-IR Transmitter
IR IR
Flasher Receiver
HDMI IN HDMI OUT
Back
IR IR
Flasher Receiver
HDMI OUT
B-520-RX-230-IR Receiver
HDTV
Pin 5 White/Blue
Pin 6 Green
Pin 7 White/Brown
Pin 8 Brown
FIGURE 3: RJ45 Connections
HDMI Source
PLAY
AUTO
OFF
1 2
ON HDBT
Front
OFF
IR FLASHER
LEVEL
12V DC
HDTV
7
Power
12V DC
INPUT
HDBaseT
12V DC
INPUT
AC
Power
AC