Thread-Locking Power Connector; Specifications - Binary B-520-RX-230-IR Installation Manual

6.5. Thread-Locking Power Connector

This receiver is Power over Cable (PoC) capable and therefore can be powered
from either a transmitter or the receiver. The Power over Cable feature enables the
receiver to be powered from either end when paired with a compatible HDBaseT
transmitter or HDBaseT matrix switcher.
CAUTION: Do not connect the power supply to the device until it is completely
installed and all connections have been made.

7. SPECIFICATIONS

Technical
HDMI Compliance
HDCP Compliance
Video Bandwidth
HDMI over UTP
Transmission
Input TMDS Signal
Input DDC Signal
ESD Protection
IR Signal (Bidirectional)
Connections
HDBaseT Link
HDMI
IR Receiver (In)
IR Flasher (Out)
Power
Controls
DIP switch 1
HDMI 3D
Yes
10.2 Gbps
Cat 5e/6
Cat 6a/7
1.2V (peak-to-peak)
5V (peak-to-peak, TTL)
(1) Human body model: ±5kV (air-gap discharge) &
±8kV (contact discharge) (2) Core chipset — ±8kV
Carrier frequency: 20–60kHz
1x RJ45
1x HDMI Type A
(19-pin female)
1x 3.5mm Mono/Stereo
1x 3.5mm Mono
Thread-Locking
IR RCVR PWR OFF/ON
11
1080i/720p 24-bit color: 200'
Full HD 1080p 24-bit color: 200'
Full HD 1080p 36-bit color: 200'
Ultra HD 4K2K@30 Hz 115'
1080i/720p 24-bit color 230'
Full HD 1080p 24-bit color 230'
Full HD 1080p 36-bit color 230'
Ultra HD 4K2K@30 Hz 130'