Applications; Hdbaset Link (Rj45) Connection - Binary B-540-EXT-330-RS-IPW Installation Manual

6. APPLICATIONS

AC
Power
Note: When a power supply is connected to either the transmitter or receiver, the HDBaseT
link sends power to the other unit. Only one unit requires a power supply to be connected.

6.1. HDBaseT Link (RJ45) Connection

This device is specified to operate with category cables for communication between the transmitter
and receiver. The transmission path may include a maximum of two keystones and two patch cables,
as long as the total length does not exceed 230 ft for Cat5e/6 and 330 ft for Cat6a/7.
Note: The HDBaseT Link RJ45 connection includes a 12V signal. Do not connect anything to
this port other than an HDBaseT transmitter or receiver.
HDMI
B-540-EXT-330-RS- IPW Transmitter
Ethernet
Back
B-540-EXT-330-RS-IPW Receiver
Back
HDMI
FIGURE 3 : Application Diagram
TIA/EIA Standard 568-B (Gold Pins Facing Up)
Pin 1 White/Orange
Pin 2 Orange
Pin 3 White/Green
Pin 4 Blue
FIGURE 4: RJ45 Connections
HDMI Source
PLAY
1 2 3
ON
Pin 5 White/Blue
Pin 6 Green
Pin 7 White/Brown
Pin 8 Brown
8
Front
CAT5
Front