Device Layout; B-520-Rx-230-Ir Receiver - Binary B-520-RX-230-IR Installation Manual

4. DEVICE LAYOUT

4.1. B-520-RX-230-IR Receiver

A B C
IR IR
Flasher Receiver
Back
A. IR Flasher
IR output to connect to IR Flasher
B. IR Receiver
IR input to connect to IR Receiver or to output of a control system
C. HDMI Out
HDMI Output to connect to the HDMI input of a sink (display)
D. DIP Switch
IR RCVR PWR OFF/ON
OFF to connect to control system | ON to connect to IR receiver
E. IR Flasher Level
Adjusts the intensity of the IR Flasher output
F. Update (USB type Mini-B)
To connect USB cable A to Mini-B when updating firmware
G. HDBaseT (RJ45)
To connect to the HDBaseT RJ45 port on Matrix switcher
H. Link LED
Lights up green when synced with a Matrix switcher or transmitter
I. Power LED
Lights up blue when the unit has power
J. Thread-locking Power Connector
Connect to an optional 12V DC, 2A power supply (B-PS-12VDC-2A)
HDMI OUT
FIGURE 1: Receiver Layout
E
D
OFF
IR FLASHER
LEVEL
12V DC
5
F G H I
12V DC
INPUT
Front
J