External Filter Guard; Mixing Cabinet; Filter Guard Settings - Frico SIReFAEMX Original Instructions Manual

GB

Filter guard settings

Filter alarm alarms when the set fixed run
time has been exceeded.
>Installer menu
Heating settings
Filter guard settings
External control
Filter timer setting
Under Filter timer setting, set the desired run
time to between 50 and 9950 hours.
>Installer menu>Filter guard settings
Filter timer on/off
Filter timer setting

External filter guard

Factory setting
Filter timer setting: 1500 h (50 - 9950 h)
Filter timer on/off
Filter alarm is activated by selecting On,
under Filter timer on/off.
>Installer menu>Filter guard settings
Filter timer on/off
Filter timer setting
External filter guard
Factory setting
Filter timer on/off: Off (On)
External filter guard
If an external filter guard, e.g. a pressure
switch, is used, it is activated under External
filter guard, select On.
>Installer menu
Filter timer setting
External filter guard
Last filter change
Factory setting
External filter guard: Off (On)
34
SIRe Advanced Fan Heater Electric
>Installer menu>Filter guard settings
Filter timer setting
• 1500 h
Last filter change
To check the number of run time hours since
the last filter replacement, select Last filter
change. The time is reset when the filter
alarm is reset. If the time is to be reset before
the alarm has gone, switch the filter timer on
and off.
>Installer menu>Filter guard settings
Filter timer setting
External filter guard
Last filter change

Mixing cabinet

When the mixing part is used, it is activated
under Mixing cabinet settings.
>Installer menu
Filter guard settings
Mixing cabinet
External control
Factory setting
Mixing cabinet on/off: Off (On)
When the mixing cabinet is activated, more
options are available in the menu under
Mixing cabinet settings.
Min outlet temp.
The outlet temperature must be limited under
Min. outlet temp.
>Installer menu>Mixing cabinet
Mixing cabinet on/off
Min outlet temp.
Day damper pos.
Factory setting
Min outlet temp.: 15°C (5 – 30°C)
Day damper pos.
Desired current damper position daytime.
>Installer menu>Mixing cabinet
Min outlet temp.
Day damper pos.
Night damper pos.
Factory setting
Day damper pos.: 100% (0 – 100%)
>Installer menu>Filter guard settings
Last filter change
0 h
>Installer menu>Mixing cabinet
Mixing cabinet on/off
>Installer menu>Mixing cabinet
Min outlet temp.
• 15°C
>Installer menu>Mixing cabinet
Day damper pos.
100 %