Fcc Statement - Telex BP-1002 Operating Instructions Manual

The Audiocom® BP-1002 and BP-2002 are microprocessor controlled one- and two-channel
intercom belt packs. An internal switch and jumper setting allows the units to be used with
Clear-Com ® components, if desired. Other internal switch and jumper settings allow the unit to be
uniquely configured to the operator's requirements.
This equipment uses, and can radiate radio frequency energy that may cause interference to radio
communications if not installed in accordance with this manual. The equipment has been tested
and found to comply with the limits of a Class A computing device pursuant to Subpart B, Part 15 of
FCC Rules which are designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area may cause
interference which the user (at his own expense) will be required to correct.
This product meets the Electromagnetic Compatibility Directive, 89/336/EEC.
®
Audiocom is a registered trademark of Telex Communications, Inc., Burnsville, Minnesota 55337
®
Clear-Com is a registered trademark of Clear-Com Intercom Systems
INTRODUCTION

FCC STATEMENT

3