Headphone Amplifier - Telex BP-1002 Operating Instructions Manual

Unbalanced Intercom Channel:
Output Level: 480 mVrms ±10%
Input Impedance: 200 ohm ±5%
Bridging Impedance: greater than 10,000 ohm
Call Signalling:

HEADPHONE AMPLIFIER:

Voltage Gain:
20 ±3 dB from the line
Maximum Output:
60 mW into 150 ohm
Frequency Response:
200 Hz to 8 kHz with no more than 4 dB deviation
Audible Alert:
1 kHz, at the headset
Total Harmonic Distortion:
Less than 2% at 50 mW from the line
Sidetone:
20 dB minimum range, adjustable
DYNAMIC MICROPHONE AMPLIFIER:
Voltage Gain:
Mic to Channel; 45 ±3 dB, before limiting
Mic to Headphone; adjustable, 65 dB range into 150 ohm
Frequency Response:
200 Hz to 8 kHz +1/-3dB
Total Harmonic Distortion:
Less than 1% at Channel output at 1 kHz
ELECTRET MICROPHONE AMPLIFIER:
Voltage Gain:
Mic to Channel; 24 ±3 dB, before limiting
Mic to Headphone; adjustable, 45 dB ±10% into 150ohm
Frequency Response:
200 Hz to 8 kHz +1/-3dB
Total Harmonic Distortion:
Less than 1% at Channel output
Send: 12 ±3 VDC
Receive: 4 VDC minimum
13