Fcc Statement - Telex BP-1002 Operating Instructions Manual

Figure 3. Printed Circuit Board
INTRODUCTION
The Audiocom® BP-1002 and BP-2002 are microprocessor controlled
one- and two-channel
intercom belt packs. An internal switch and jumper setting allows the
units to be used with
Clear-Com ® components, if desired. Other internal switch and jumper
settings allow the unit to be uniquely configured to the operator's require-
ments.

FCC STATEMENT

This equipment uses, and can radiate radio frequency energy that may
cause interference to radio communications if not installed in accordance
with this manual. The equipment has been tested and found to comply
with the limits of a Class A computing device pursuant to Subpart B, Part
15 of FCC Rules which are designed to provide reasonable protection
against such interference when operated in a commercial environment.
Operation of this equipment in a residential area may cause interference
which the user (at his own expense) will be required to correct.
® Audiocom is a registered trademark of Telex Communications, Inc., Burnsville,
Minnesota 55337
®
Clear-Com is a registered trademark of Clear-Com Intercom Systems
3