Direct Circulation Baseboard Installation - Central Boiler e-Classic 1450 IR Owner's Manual

Direct Circulation Baseboard Installation

Baseboard heaters, as either the main source of heat or
as supplements to forced-air or boiler applications are
easily plumbed into the water lines from the outdoor
furnace.
Fig. 27
NOTE
Outdoor furnace water temp
setpoint should be set at
185˚F (85˚C) minimum.
Fig. 28
NOTE
Outdoor furnace water temp
setpoint should be set at
185˚F (85˚C) minimum.
Section 1 - Outdoor Furnace Installation
This horizontal assembly
must not exceed a height
of 4 inches (10 cm) above
top of water heater.
This horizontal assembly
must not exceed a height
of 4 inches (10 cm) above
top of water heater.
Fig. 27 and 28 illustrate direct circulation baseboard
installation examples.
Return to
Outdoor Furnace
25