Disassembly - Mitsubishi Electric XD8100U Service Manual

DISASSEMBLY

1. Removal of the lens ASSY, zoom,
focus motor ASSY
1. While anti-clockwise turning the lens ring as shown in
Fig. 3-1, and remove it.
2. Remove the screw (a) and top cover ASSY as shown in
Fig. 3-1.
3. Disconnect the connector (MF) on the MOTOR PCB
ASSY as shown in Fig. 3-1.
4. While pressing the (b) button, and move the lever (c) in
the direction indicated by the arrow in the Fig. 3-1.
5. Remove the lens ASSY as shown in Fig. 3-1 slowly.
6. Remove the two screws (d), two screws (e), two screws
(f), and zoom, focus motor ASSY as shown in Fig. 3-1.
b
ax1
MF
Lens ASSY
Zoom, focus motor ASSY
- 22 -
Top cover ASSY
MOTOR PCB ASSY
Lens ring
dx2
ex2
Fig. 3-1
c
fx2