Disassembly; Removal Of The Top Cover And Front Asst - Mitsubishi Electric SD420U Service Manual

DISASSEMBLY

1. Removal of the top cover and
front ASSY
1. Place the projector upside down as shown in Fig. 2-1-1.
2. Remove the five screws (a) as shown in Fig. 2-1-1.
3. Place the projector bottom down as shown in Fig. 2-1-2.
4. Lift the top cover in the arrow's direction as shown in
Fig. 2-1-2.
5. Disconnect the connector (CN2) as shown in Fig. 2-1-2.
6. Disconnect the three connectosr (J6,J8 and J9) as
shown in Fig. 2-1-3.
7. Lift the front ASSY in the arrow's direction as shown in
Fig. 2-1-3.
a
a
CN2
- 7 -
a
a
Fig. 2-1-1
Top cover
Fig. 2-1-2
Front ASSY
J6
J9 J8
Fig. 2-1-3
a