Specifications - Mitsubishi Electric XD8100U Service Manual

• Rated Voltage : AC 100 to 240V ; 50/60Hz,
• Power Consumption : 8.7A , 860W
During standby
AC 100-120V:
2W (when STANDBY MODE is STANDARD)
0.2W (when STANDBY MODE is LOW)
AC 220-240V:
2W (when STANDBY MODE is STANDARD)
0.3W (when STANDBY MODE is LOW)
• Display Technology : 0.7-inch single chip DMD
Pixel 1,024 × 768 = 786,432 pixels
• Projection Lens : F 2.0 - 2.4 f = 24.5 - 33.1 mm
• Light Source Lamp : 330 W × 2
• Image Size : 40 to 300 inch
(projection distance) (projection distance ; 1.4 to 10.6 m)
• Computer Signal : Maximum resolution ; 1,920 × 1,200 dots
Panel resolution ; 1,024 × 768 dots
• Video Signal : NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
• Component Signal : 480i,480p,576i,576p,720p,1080i,1080p
Panel resolution ; 1,024 × 768 dots
• S-Video Input : Luminance signal ; 1.0 V(p-p) 75Ω (negative sync)
Chrominance signals ; 0.286 V(p-p) 75Ω (burst signal)
• Video Input : 1.0 V(p-p) 75 Ω (negative sync)
• Component Video Input : YC
Y ; 1.0 V(p-p) 75 Ω (negative sync)
C
• Analog Input : RGB ; 0.7 V(p-p) 75 Ω (negative sync)
: YC
Y ; 1.0 V(p-p) (negative sync)
C
: HD/CS ; TTL level (negative or positive polarity)
: VD ; TTL level (negative or positive polarity)

SPECIFICATIONS

C ;
B R
C ; 0.7 V(p-p) 75 Ω
B R
C ;
B R
C ; 0.7 V(p-p)
B R
• Digital Input (DVI)
• Digital Input (HDMI)
• Control Terminal/
Others
• Dimensions
(not including protrusion)
• Weight
*1
• Operating temperatures
• Weight and dimensions shown are approximate.
• Design and specifi cations are subject to change without notice.
- 3 -
: DVI-D interface (TMDS single link) with HDCP
: HDMI interface (TMDS single link)
: SERIAL IN/OUT (D-SUB 9-pin male)
RS-232C standards,
LAN (RJ-45),
REMOTE 1 IN (D-SUB 9-pin female),
REMOTE2 IN/OUT (Stereo mini jack (ø3.5))
: 490 (W) × 201 (H) × 421 (D) mm
(projector only)
490 (W) × 201 (H) × 506 (D) mm
(including the terminal cover)
*1
: 16.0 kg (projector only)
: 16.5 kg (including the terminal cover)
: +41°F (+5°C) to +104°F (+40°C)
( Standard altitude mode: Floor
installation/ceiling installation)
+41°F (+5°C) to +95°F (+35°C)
(Other than above.)
*1: For XD8100U only.
*1