Motorola MBP622 User Manual page 12

4. If there is no connection or you are out of range, the video display will go
off, the symbol
every 9 seconds. (If the unit is on scan
Move the Parent Unit closer to the Baby Unit to re-establish the link.
5. Press and hold the POWER ON/OFF button
scrolls across fully, to turn OFF the Parent Unit.
NOTE
The battery icon
every 15 seconds to indicate that the battery is low and needs to be recharged.
The battery pack will take approximately 16 hours to charge fully.
When charging
1. If the Parent Unit is turned OFF when the Adapter is plugged in, it displays
the "Power Adapter" icon briefly, followed by a large battery icon with
internal segments cycling for 60 seconds, before the display goes blank.
Note that the Unit will continue to charge. The Blue LED at the top left
corner will light up to indicate that the Adapter is plugged in.
2. If the Parent Unit is turned ON when the Adapter is plugged in, the battery
icon in the screen's top right corner will show that the battery is charging
by cycling the internal segments. The segments stop cycling when the
battery is fully charged. The Blue LED at the top left corner will light up to
indicate that the Adapter is plugged in.
12
will flash on the LCD screen, and the unit will beep
will turn Red, flash, and the Parent Unit will beep about
1 ?
the symbol displays.)
P
until the progress bar
Getting Started